Isuzu 700P 3.55-Ton National VI Foam Fire Truck

Isuzu 3.55-ton foam fire engine

(Isuzu QL1110ANKAY chassis)

Technical Specification Sheet

Vehicle Overview

CLW5100GXFPM35/QL foam fire engine modified from Chongqing Isuzu 700P, model QL1110ANKAY Type II chassis. The vehicle consists of two major parts: the firefighter cabin and the body. The cabin is a double-row cab that can accommodate 3+3 people. The vehicle has an exposed tank structure. The front part of the body is the equipment box, the middle part is the water tank and foam tank, and the rear part is the pump room. The liquid tank body is made of high-quality carbon steel +304 stainless steel, with epoxy primer and epoxy asphalt paint applied inside, and is connected to the chassis by elastic connection. It has a water capacity of 2500kg and a foam capacity of 1029kg. It is equipped with CB20.10/15.30 medium and low pressure fire pumps with a rated flow rate of 15/30 L/S, and PL24 fire cannons are installed on the roof. The most prominent feature of this vehicle is its large liquid capacity, good maneuverability and easy maintenance. It can be widely used in public security fire brigades, factories, mines, enterprises, communities, docks and other places to fight large oil fires and general material fires.

The fire performance of the entire vehicle complies with the requirements of GB7956-2014 standard; The chassis is certified as a national compulsory product; Engine emissions meet the requirements of GB17691-2018 Stage VI limits (National VI standard); The vehicle has passed the inspection of the National Fire Equipment Quality Supervision and Inspection Center and has been included in the Ministry of Industry and Information Technology’s announcement of new automotive products.

 

1. Main parameters of the vehicle

External dimensions: 6990×2200×2950mm

Gross mass: 10200KG

Curb weight: 6200KG

Liquid capacity: 3550KG water

Maximum speed: 100Km/h

Fire pump rated flow: 15/30 L/S 2.0/1.0 MPa

Fire cannon rated flow: 24L/s 1MPa

Fire cannon range: Water ≥45m foam ≥40m

Approach Angle/departure Angle: 17/11

 

• Bottom plate

Model: QL1110ANKAY

Engine: Isuzu (China) Engine Co., LTD

Model: 4HK1-TCG61

Power rate: 139kW

Drive type: Rear-wheel drive

Wheelbase: 3815mm

Emission standard: GB17691-2018 National VI

 

• Cab

Structure: Flat head, double-row seat four-door passenger compartment, all-steel frame welded structure.

Seating arrangement: 3 people in the front row and 3 people in the back row. The back row seats are equipped with 3 air respirator backrest brackets and fixed clamps, as well as shock protection devices.

Guardrails and handrails are added to the front of the seats. Firefighters quickly carry their air breathing apparatus on their way to the fire scene and quickly engage in firefighting operations upon arrival.

Equipment: In addition to the original vehicle equipment, it is equipped with a power take-off control switch, a 100W alarm, and a warning light switch.

• Tank (Optional PP tank, stainless steel tank)

Capacity: Water: 2500Kg Foam: 1029kg

Material: Water tank: high-quality steel plate, treated with high-tech anti-corrosion

Foam tank: 304 stainless steel plate, durable

Structure: Welded frame, with longitudinal and transverse anti-sway plates inside the tank to reduce the impact of water inside the tank during vehicle movement; The front and rear wall panels of the tank are folded with trapezoidal ribs to give the tank sufficient strength and rigidity.

The top of the tank is equipped with quick-opening manholes for maintenance personnel to enter and exit. The tank is equipped with a device and a filter screen to prevent the water pump from creating vortices that could affect the flow rate.

The tank is equipped with a stainless steel float level indicator, which shows the volume of the fire extinguishing agent in the tank through the level gauge on the instrument panel; A drain with a ball valve is provided at the bottom of the tank.

The tank is equipped with two 76mm overflow pipes and one 76mm injection port on each side of the carriage for the convenience of water supply and liquid filling for other vehicles.

Equipped: 2 inlets with quick-locking and opening devices.

2 Level indicators.

2 Drain outlets with stainless steel ball valves.

2 Water injection ports (one on each side)

Workmanship: Weld firmly and reliably, remove and clean up defects such as slag inclusions and false welds; A 24-hour hydrostatic test should be conducted on the tank after welding to ensure no leakage.

 

• Fire pumps and piping systems

Fire pump: CB20.10/15.30 Medium and low pressure fire pump (Optional low pressure pump, imported pump)

Flow rate: 15/30 L/s

Pressure: 2.0/1.0 MPa

Mounting type: Rear

Vacuum pump: Piston type;

Vacuum pump material: Wear-resistant, corrosion-resistant to meet sealing requirements;

Suction time ≤35 seconds, suction depth ≥7 meters.

Maximum vacuum: ≥85kPa;

Optional: Low-pressure fire pump, imported fire pump

Piping system

Suction pipe: The pump is equipped with a DN100 inlet, which can draw water from natural water sources, liquid tanks, fire water storage tanks, and can be connected to the fire hydrant with a conversion reducer. The suction pipe is placed on the roof of the vehicle. 1 inlet with a DN100 butterfly valve (optional pneumatic butterfly valve) for connection to the water tank.

Outlet piping: One DN80 outlet fire cannon piping and control valve (optional pneumatic butterfly valve) is installed on the roof with a flexible joint; One DN80 and one DN65 manual ball valve control outlet is set on each side of the pump room.

Water injection pipeline: A DN65mm pump water injection pipeline and control valve (optional pneumatic butterfly valve) are set in the pump room;

There is one DN65 water injection pipe on each side of the carriage, which can be used to inject water into the tank. The interface is an internal snap-on interface and is equipped with a cover.

Drain pipes: Drain pipes are installed in the pipes to protect the pumps and ball valves, and ball valves are provided respectively.

Cooling water lines: To enable the power take-off to handle various complex situations during operation, there are cooling water lines and control valves connected to the inlet and outlet water lines.

 

• Fire cannon

Model: PL10/24 Fire gun (Optional remote control gun, imported gun)

Flow rate: 24 (L/s)

Range: Water ≥45m foam ≥40m

Pressure: 1.0MPa

Location: At the top of the water tank.

Control: Manual control with locking mechanism for easy operation.

Optional: Imported fire cannon, remote-controlled fire cannon

• Power take-off

Type: Full-power sandwich power take-off

Cooling method: Forced water cooling

Lubrication: Splash oil lubrication

Operation: Hang the power take-off from the dashboard in the cab. The power take-off fits smoothly without any noise

Installation: The power take-off fits well with the engine, is precisely installed, and does not fall off on its own after engagement.

• Equipment box and pump room

Main material: The frame and the skin are made of high-quality carbon steel; The interior frames are made of aluminium alloy profiles, and the interior panels are oxidized aluminium sheets.

Basic structure:

1. It is an integral structure with the equipment box at the front and the pump room at the back.
2. The pump room at the rear is equipped with a dashboard and operating system, and both the equipment box and the pump room have lockable roller shutters. The frame is welded and ensures its strength and rigidity.
3. The space can be adjusted at will, and the equipment box has drainage holes.
4. The equipment box is reliable, aesthetically pleasing, adjustable at will, and equipped with a large space curtain door equipment box to ensure full utilization of space.
5. The carriages and pump rooms are equipped with lighting fixtures to meet the lighting needs during night fire-fighting operations.

Aluminium roller shutters:

1. All equipment compartments and pump rooms are equipped with lockable roller shutters. The handles and lock pins are sturdy and durable, do not deform, and the sealing performance has been tested for water spray to ensure no leakage.

2 There are rivets in the tracks on both sides of the roller shutters to prevent them from falling off.

3 There are lights in each equipment compartment.

4. There are aluminium curtain doors on the left and right, one at the rear, which are safe, reliable, beautiful and practical.

Basic principles:

(1) Design equipment integration according to combat formation and combat deployment;

(2) Design various equipment mounts according to ergonomic principles;

(3) The principle of simplicity and practicality in using any equipment inside the box without any climbing tools.

(4) Place equipment according to the logical relationship of use and frequency of use;

(5) Take any equipment within 1-2 actions while standing on the ground or on the pedal.

 

8. Electrical systems

The top of the cab is equipped with a long row of red luxury warning lights.

The alarm power is 100W;

For safety purposes, the entire vehicle wiring is made with an integrated wiring harness, and waterproof plugs are used at the connection points to ensure the safety of the wiring during use.

One fire scene lighting lamp is equipped on the roof of the vehicle. Safety sign lights are installed on the lower sides of the vehicle, and reflective markings are affixed to the body and rear as standard.

All equipment boxes are equipped with LED lights for use in night combat lighting.

There are two flashing lights on each side of the vehicle, safety sign lights and side reflectors (combined type) on each side, front and rear outline lights, one turn signal on each side, and lighting in the passenger compartment, equipment box and pump room.

The alarm, warning lights, strobe lights and circuits are independent additional circuits, and the control devices are installed in the driver’s cabin.

All circuits are protected by bushings, and different colors are used to distinguish the connection forms and functions of the circuits.

Equipment on the instrument panel in the pump room: liquid level gauge, tachometer, pressure gauge, vacuum gauge, equipment box lighting switch, etc.

 

9. Instrument panels and equipment on them

The dashboard is located in the pump compartment at the rear of the vehicle, with a control panel and adequate lighting;

All control handles, switches, and indicator lights are marked in Chinese near them;

Instructions for operation are provided.

All signs are durable and highly attached, and can withstand the effects caused by sudden changes in temperature and climate.

The operation panel is made of high-quality aluminium plate, which is beautiful, durable and has a relatively light overall weight.

The pump room operating system is located at the rear of the vehicle, with no pressure outlet to ensure the safety of the operator and panel lighting.

 

10. General Technical Requirements

The overall performance of the vehicle shall comply with the provisions of GB7956 “Performance Requirements and Test Methods for Fire Engines”.

The overall appearance of the vehicle maintains a certain degree of flatness and complies with relevant regulations.

All rivets maintain a certain density and comply with the enterprise standards.

All welds are firm, smooth, flat and in compliance with enterprise standards.

All operating switches, instruments, equipment racks and vehicles are marked with nameplates that comply with the specifications.

 

Xi. Accompanying documents

1) Chassis User manual 2) Chassis Quality warranty card

3) Chassis Maintenance manual 4) Chassis certificate of conformity

5) List of tools with the vehicle 6) Engine number imprint

7) Chassis number imprint 8) Fire engine user manual

9) Fire engine Fire equipment List 10) Fire engine certificate of conformity

11) Fire truck tracking service card 12) Fire exchange list

Equipment allocation list

Serial Number	姓名	Units	Quantity	Notes
1	Fire hose	disc	10	13-Φ65-20 3 pan 16-Φ65-20 3 pan 13-Φ80-20 2 reel 16-Φ80-20 2 reel
2	Suction pipe	meter	8
3	Water filter	a	1
4	Water collector	a	1
5	Two parts water	a	1
6	Suction pipe wrench	a	2
7	Ground fire hydrant wrench	a	1
8	Underground fire hydrant wrench	a	1
9	Guard belt bridge	a	2
10	Cloth wrapped with water hose	a	4
11	Hose hook	a	4
12	Fire axe	a	1
13	Iron collar	a	1
14	Shovel	a	1
15	Ding Zi ho	a	1
16	Waist axe	a	1
17	Reducer interface	only	2	Insert Φ65 to Φ80
18	Switch the direct current water gun	the	1
19	Flowering water gun	the	1
20	Dry powder fire extinguisher	with	1	3 kg, ABC dry powder
21	Foam gun	the	1
22	Foam pipette	the	1

Optional configuration

1	Fire suits	Set of	1
2	Pull the ladder	the	1
3	Automatic charging device	Set of	1
4	Empty the backrest	Set of	1
5	Air respirator	Set of	/	Number of members
6	Telescopic ladder	vice	1
7	Hand-lift pump	vice	1
8	Demolition tools	Set of	1	Custom-made on demand
9	Other fire-fighting equipment	Set of	/	Custom-made on demand