Chengli Special Vehicle Co., LTD
Technical Specification Sheet
(The pictures are for reference only. Please refer to the actual vehicle.)
Dongfeng Tianjin Food Support vehicle
- Overview of the vehicle
The CLW5161XCCADY food truck is mainly composed of chassis, body, cooking facilities such as steaming and stir-frying, water system, electrical system, oil system, etc. It mainly provides complete catering support for field rescue personnel and can meet the dining needs of no less than 100 people per hour (standard meal of two dishes and one soup). It is highly mobile, safe and environmentally friendly, and easy to use. It is reliable in overall performance and easy to use
. The design of the dining car structure is based on relevant standards such as “QC/T453-2002 Van Transporter” and “Technical Conditions for the Operation Safety of Motor vehicles (GB7258-2017)”, in combination with the specific indicators of the vehicle chassis, with the principle that the basic parameters such as the overall load-bearing capacity of the vehicle and the load of the front and rear axles do not exceed the specified values, The overall design is carried out in accordance with standardization, process and modularization.
|
Categories |
Description |
| Overall vehicle dimensions | Length × Width × height: 10500×2550×3850mm |
|
Full-load gross mass |
16000kg |
|
Prepared mass |
15805kg |
|
Chassis |
Dongfeng Tianjin 4 ×2 |
|
Wheelbase |
5800mm |
|
Engine power |
169kw |
|
Emission standards |
National VI |
|
Departure Angle/approach Angle |
19/7 |
|
Maximum speed |
89km/h (electronic speed limit) |
|
Braking system |
With anti-lock braking (ABS) function |
|
Main Features |
The main body is formed in one piece with composite panels. The body can be extended to the left and right sides to form a platform, and the rear door opens. Equipped with fuel-saving steaming cabinets, stew POTS and woks, sink, cutting counter, refrigerator, etc., it can meet the dining needs of 100 people per hour. |
- Reference photos of the vehicle
- Chassis Standard Technical Parameters Sheet
| Serial number | 姓名 | Project requirement value or statement | Bidder’s guaranteed value |
| 1.1 | Announcement by MIIT | ||
| 1.1.1 | Ministry of Industry and Information Technology Announcement Batch Number | Bidders fill in | To be provided upon delivery |
| 1.1.2 | Catalogue serial number | Filled in by the bidder | 153 |
| 1.1.3 | Announcement of Product Model | Bidders fill in | DFH1180EX8 |
| 1.2 | Product name and model | Bidders fill in | Food truck |
| 1.3 | Engine | ||
| 1.3.1 | ※ Rated power (kW) (≥) | 150 | 169 |
| 1.3.2 | Displacement (mL) (≥) | 4500 | 6200 |
| 1.3.3 | Maximum torque (N ·m) (≥) | Bidders fill in | 950N.m |
| 1.3.4 | Vehicle fuel consumption (L/100km) | Bidders fill in | 25.3 |
| 1.3.5 | Environmental protection standards | National VI | Country VI |
| 1.3.6 | Types of fuel | Diesel | Diesel |
| 1.3.7 | Number of engine cylinders | Bidders fill in | 6 |
| 1.4 | Automobile chassis | ||
| 1.4.1 | Chassis type | Bidders fill in | Class II chassis |
| 1.4.2 | Transmission type | Manual/Automatic | Manual |
| 1.4.3 | Drive type | Bidders fill in | 4×2 |
| 1.4.4 | Vehicle chassis manufacturing time | Manufactured within six months prior to vehicle delivery | Within 6 months prior to vehicle delivery
Manufacturing |
| 1.4.5 | Wheelbase (mm) (≥) | Bidders fill in | 5800 |
| 1.4.6 | Number of axes (≥ | 2 | 2 |
| 1.4.7 | Tire specifications | Bidders fill in | 10.00R20 18PR tyre
Model |
| 1.4.8 | Tyre types | Bidders fill in | Radial steel wire tire |
| 1.4.9 | Number of tyres (≥) | 6 | 6 |
| 1.4.10 | Number of full-size spare tires (≥) | 1 | 1 |
| 1.5 | Powertrain | ||
| 1.5.1 | Steering gear type | Steering assist | Steering power |
| 1.5.2 | Brake type (front/rear) | Bidders fill in | Front disc rear drum brake system |
| 1.6 | Vehicle performance parameters | ||
| 1.6.1 | Maximum speed (km/h) (≥) | 80 | 89 |
| 1.6.2 | Minimum ground clearance (mm) | Filled in by the bidder | 230 |
| 1.6.3 | Minimum turning radius (m) | Bidders fill in | 18 |
| 1.6.4 | Climbing performance (climbing slope %) (≥) | Bidders fill in | 30% |
| 1.6.5 | Approach Angle (°) (≥) | Bidders fill in | 19 |
| 1.6.6 | Departure Angle (°) (≥) | Bidders fill in | 7 |
| 1.6.7 | Overhang (mm) | Bidders fill in | 1400 |
| 1.6.8 | Rear overhang (mm) | Bidders fill in | 3300 |
| 1.7 | Vehicle dimensions and mass | ||
| 1.7.1 | Overall vehicle dimensions (length) (mm)
≥) |
9000 | 10500 |
| 1.7.2 | Overall vehicle dimensions (width) (mm)
≥) |
2400 | 2550 |
| 1.7.3 | Overall vehicle dimensions (height) (mm)
≤) |
3900 | 3850 |
| 1.7.4 | Full load mass (kg) | Bidders fill in | 16000 |
| 1.7.5 | Curb weight (kg) | Bidders fill in | 15805 |
| 1.7.6 | Capacity (persons) (≥) | 3 | 3 |
| 1.8 | Others | ||
| , version 1.8.1 | The exterior color of the vehicle body | The project unit is selected after winning the bid | As required by the user |
| 1.8.2 | Exterior markings on the vehicle body | The project unit is selected after winning the bid | As required by the user |
| 1.8.3 | Front face spoiler | Bidders fill in | no |
| 1.8.4 | Air conditioning system in the driver and passenger area | Cold, warm | Cold, Warm |
| 1.9 | ABS | Filled in by the bidder | ABS |
| 1.10 | EBS | Bidders fill in | EBS |
| 1.11 | Body balance hydraulic stabilization system | Bidders fill in | ESC |
- Standard Technical Parameters Table for the upper Assembly
| Serial Number | 姓名 | Project requirement value or statement | Bidder’s guaranteed value |
| 2.1 | Carriages | ||
| 2.1.1 | Length (mm) | Filled in by the bidder | 8000 |
| 2.1.2 | Width (mm) | Bidders fill in | 2550 |
| 2.1.3 | Height (mm) | Bidders fill in | 2300 |
| 2.1.4 | Floor | Anti-slip patterned aluminium sheets should be used | Use anti-slip patterned aluminium sheets |
| 2.1.5 | Compartment structure | The carriage is an integrated frame structure | The carriage is an integrated frame structure |
| 2.1.6 | Filling material inside the box
material |
Fire-retardant materials that are heat-insulating, heat-preserving and noise-reducing should be used
Polyurethane foam materials |
Use insulation, heat preservation, noise reduction resistance
Flammable polyurethane foam material |
|
2.1.7 |
Compartment material |
Frame wall thickness ≥2mm rectangular steel, in
Anti-rust treatment; The outer skin is 2mm thick aluminum sheet/cold-rolled steel sheet |
Frame wall thickness is 2mm rectangular steel, in
Anti-rust treatment; The outer skin is 2mm thick aluminum sheet/cold-rolled steel sheet |
|
2.1.8 |
Skirt box |
Welded square tubes with a frame wall thickness of ≥1.2mm and treated for rust prevention; An aluminum alloy patterned base plate is laid inside. The skirt door is made of all aluminium | The frame wall is made of 1.2mm square tubes welded and treated for rust prevention; An aluminum alloy patterned base plate is laid inside. The skirt box door is full
Aluminum structure |
| 2.1.9 | Whole vehicle paint | With a baking varnish process, the upper body as a whole with the driver
The outdoor watch is in its original color |
With a lacquered finish, the top is totally in line with
The original color of the cab exterior |
| 2.1.10 | Side skylight | At least two on each side | Two on one side |
| 2.1.11 | Ventilation skylight | The ventilation skylight has an escape function | The ventilation skylight has an escape function |
| 2.2 | Compartment expansion system | ||
|
2.2.1 |
Wingspan door |
The wingspan doors on both sides of the box are flipped and supported by hydraulic rods
Support, can be extended up and down for operation; The inner side is made of patterned aluminium plate |
The wingspan doors on both sides of the body flip, hydraulic
Supported by rods, it can be extended up and down for operation; The inner side is made of patterned aluminium plate |
| 2.2.2 | Side wingspan door supports
brace |
Three mechanical support legs and wingspan doors on each side
Used in conjunction |
Three mechanical support legs with wingspan on each side
The door is used in conjunction |
| 2.2.3 | Wingspan door hangers on both sides
ladder |
It should be made of aluminum alloy and matched with the wingspan door
Used in sets |
Use aluminium alloy with wingspan doors
Used in conjunction with it |
| 2.2.4 | Back door | Single opening/double opening | Single open/Double open |
| 2.2.5 | Boarding ladder | The pull-out type should be used in conjunction with the vehicle body | Use the pull-out type to match the vehicle body |
| ; | Use; | ||
| 2.2.6 | Roof ladder | Stainless steel should be used for roof mounting
Maintenance |
Made of stainless steel for the roof
Facility maintenance |
|
2.2.7 |
Interior |
The interior surfaces are decorated with ≥1.5mm stainless steel plates, the floor surfaces are covered with anti-slip patterned aluminum plates, and the middle passageways are padded with anti-slip pads.
Floor drains are also installed |
The interior surfaces are decorated with 1.5mm stainless steel plates, the floor surfaces are covered with anti-slip patterned aluminium plates, and the passageways in the middle are laid
Anti-slip MATS and floor drains are added |
| 2.3 | Power supply and lighting system
system |
||
| 2.3.1 | Generator | On-board diesel generator with rated power ≥15kW | Rated power 15kW on-board diesel generator
machine |
|
2.3.2 |
Municipal power supply system |
With mains power input interface; Industrial plug waterproof and dustproof, with no less than 2 reels of 30 m 3*10mm ² YC flame-retardant flexible copper cable (included)
Corresponding adapter heads, etc. |
With mains power input interface; Industrial plug waterproof and dustproof, equipped with 2 reels of 30-meter 3*10mm ² YC flame-retardant flexible copper cable
(With corresponding adapter heads) |
|
2.3.4 |
Distribution cabinet |
Including integrated control box, switch buttons, display instruments and meters, power supply lightning protection, overvoltage and overcurrent
Anti-static, safety grounding protection, etc., marked Clear identification |
Integrated control box, switch buttons, display instrument, power supply lightning protection, overvoltage and overcurrent protection, anti-static, safety connection
Ground protection, etc., clearly marked |
| 2.3.5 | Waterproof socket | Bidders fill in | It is equipped with one set of waterproof sockets to meet the needs of the entire vehicle
Use of electrical equipment |
| 2.3.5 | Site lighting | The roof fence is equipped with no fewer than six lights
AC220V should be used and can be controlled separately |
The roof fence is equipped with 6 lights to enable
With AC220V, it can be controlled individually |
|
2.3.6 |
Equipment cabin lighting |
Bidders fill in |
The equipment cabin is equipped with LED ceiling lights for illumination. The cooking area is equipped with LED ceiling lights
For lighting purposes. |
| 2.3.7 | Grounding system | Including grounding rods, grounding stakes, grounding wires, etc | It includes grounding rods, grounding stakes and grounding wires
Such as |
| 2.4 | Water supply and drainage systems | ||
|
Against 2.4.1 |
Clean water tank |
The outer side of the tank should be made of 304 stainless steel with vent holes, drain valve, volume ≥800 L, heat insulation, anti-freezing and other functions
A liquid level gauge should be installed |
Made of 304 stainless steel, with vent holes, drain valve, volume 800 L, with heat insulation, anti-freezing and other functions, tank
A level gauge should be installed on the outside |
| 2.4.2 | Sewage tank | Stainless steel should be used with cleaning holes and
Drain outlet, volume ≥ 200L, with partition |
Made of stainless steel with cleaning holes
And a drain, volume 200L, with |
| Heat, anti-freezing and other functions should be provided on the outside of the box
Install the liquid level gauge and the sewage hose |
Functions such as heat insulation and freeze resistance, outside the tank
Level gauges and drain hoses should be installed on the side |
||
| 2.4.3 | Water injection interface | Bidders fill in | The water filling port is a standard fire interface DN65 |
| 2.4.4 | Filtering system | The water output is ≥1000L/h, reaching drinking water
Standard |
The water output is 1000L/h, reaching drinking water
Standard |
| 2.4.5 | Waterway piping system | It should be made of stainless steel with insulation,
Functions such as anti-freezing and anti-cracking |
Made of stainless steel, it has insulation
Freeze-proof, crack-proof, etc |
| 2.5 | Cooking equipment | ||
|
2.5.1 |
Stove top |
Equipped with an integrated vehicle-mounted dual stewing and stir-frying stove (capable of serving 100 people within 1 hour, with multi-level heat adjustment and microcomputer control
Heat insulation material should be embedded between the pot and the stove ring The drain should be made of stainless steel and equipped with the corresponding water inlet pipe and faucet |
Equipped with an integrated vehicle-mounted double stewing and stir-frying stove
(Can serve 100 people in 1 hour, multi-level heat adjustment, microcomputer-controlled, heat insulation material embedded between the pot and the stove ring, with a drainage channel) Made of stainless steel and equipped with a camera A water inlet pipe and faucet should be provided |
| 2.5.2 | Stove burning medium | Diesel | Diesel |
|
2.5.3 |
Integrated range hood |
It should be equipped with a dual-unit structure, with a fan power of ≥ 200W and made of stainless steel; It includes stainless steel air ducts, air outlets and exhaust outlets, etc | Equipped with a double-unit structure, 200W fan power, made of stainless steel; With stainless steel air ducts, air outlets and exhaust
Openings, etc. |
| 2.5.4 | Operating console | 304 stainless steel should be used | Use 304 stainless steel |
| 2.5.5 | wall cupboard | Stainless steel should be used | Use stainless steel |
| 2.5.6 | Locker | Stainless steel material should be used | Use stainless steel |
| 2.5.6 | Steamer | It should be made of 304 stainless steel and can be filled at one time
Enough for 100 people to dine |
Made of 304 stainless steel, disposable
It meets the dining needs of 100 people |
| 2.5.7 | Ultraviolet disinfection lamp | Bidders fill in | Equipped with 2 ultraviolet disinfection lamps for
Disinfection of the interior of the box |
| 2.5.8 | Cold cabinet | Capacity ≥500L should be equipped with refrigeration and freezing
And other functions |
Capacity 500L, should have refrigeration, cold
Freezing, etc. |
| 2.5.9 | Disinfection cabinet | Bidders fill in | Install vehicle-mounted fire extinguishers on the left side of the front of the work area
Poison cabinet |
| 2.5.10 | Water heater | Capacity ≥15 L | Capacity 15 L |
| 2.5.11 | Cookware and cutlery | 304 stainless steel should be used to meet ≥
100 people requirements |
Made of 304 stainless steel, it meets the requirements
100 people needed |
| 2.5.12 | Sink | Stainless steel should be used, single tank, and compatible | Use stainless steel, single slot, matched |
| There should be an inlet pipe and faucet | The corresponding inlet pipe and faucet | ||
| 2.5.13 | Dough mixer | Bidders fill in | Equipped with 1 dough mixer, 25kg per time. |
| 2.6 | Oil supply system | ||
| 2.6.1 | Auxiliary fuel tank | Capacity ≥100L | Capacity: 100L |
|
2.62 |
Stove oil line piping system | The system includes oil suction pumps, oil filters, oil separators, etc
With oil level display and control, the oil gauge shows the amount of oil in the auxiliary tank |
The system includes the suction pump, oil filter, and oil separator
Devices, etc., with oil level display and control, the oil gauge shows the amount of oil in the auxiliary tank |
| 2.6.3 | Fuel heater | Fuel line system heating | Oil circuit system heating |
| 2.7 | Others | ||
| 2.7.1 | Fully automatic self-priming increment
Pressure pump |
Head ≥15 m, flow ≥4m³/min | Head 15 meters, flow 4m³/min |
| 2.7.2 | Drain hose | Length ≥30m | Length 30m |
| 2.7.3 | air conditioner | For power ≥2 kW, ceiling-mounted models should be used | For power of 2 kW, a ceiling-mounted type should be adopted |
| 2.7.4 | Reversing surveillance | With 360 ° HD video | Have 360 ° HD video |
| 2.7.5 | Power frequency inverter charging
All-in-one machine |
Power ≥3kw can transfer direct current (24V)
Convert to alternating current (220V) power supply |
Power 3kw can convert direct current (24V)
Convert to AC (220V) power supply |
| 2.7.6 | Accessories with the vehicle | Filled in by the bidder | 1 set of on-board accessories shall be provided |
| 2.7.7 | In-vehicle tools | 1 set | 1 set |
| 2.7.8 | Fire extinguisher (2Kg) | 4, dry powder type | 4 pieces, dry powder |
| 2.7.9 | Purging device | Bidders fill in | Be equipped with one set of air line purging device |
| 2.7.10 | Trash can | Stainless steel | Stainless steel material |
- Key Components List
| Serial Numbers | Component Name | Manufacturer | Model | Origin (Country and region) |
| 1 | Chassis assembly | Dongfeng | DFH1180EX8 | Shiyan, Hubei |
| 2 | Chassis | Dongfeng | DFH1180EX8 | Shiyan, Hubei |
| 3 | Engine | Cummins | B6.2 NS6B230 | Xiangyang, Hubei |
| 4 | Transmission | Fast | / | Xi ‘an, Shaanxi |
| 5 | Rear axle | Hande | / | Xi ‘an, Shaanxi |
| 6 | Tyres | Wind God | 295/80 r22. 5 | Xiangyang, Hubei |
| 7 | Generator | Upp | KDF16000Q | Suizhou, Hubei |
| 8 | Distribution cabinet | Cheng Li | / | Suizhou, Hubei |
| 9 | Clean water tank | Cheng Li | / | Suizhou, Hubei |
| 10 | Sewage tank | Cheng Li | / | Suizhou, Hubei |
| 11 | Filtration system | Cheng Li | / | Suizhou, Hubei |
|
12 |
Double/triple stewing and stir-frying stove | Chu Tian | Double stewing and stir-frying stove | Suizhou, Hubei |
|
13 |
Integrated range hood |
Cheng Li |
The housing is made of 1.5mm stainless steel plate, with a fan switch at the front end and a filter-type reverse edge (anti-
The exhaust volume is 130m³/h |
Suizhou, Hubei |
| 14 | Steamer | Chu Tian | / | Suizhou, Hubei |
| 15 | Cold cabinet | Cheng Li | / | Suizhou, Hubei |
| 16 | Disinfection cabinet | Cheng Li | / | Suizhou, Hubei |
| 17 | Water heater | Cheng Li | / | Suizhou, Hubei |
| 18 | Dough mixer | Cheng Li | / | Suizhou, Hubei |
| 19 | Fuel heater | Cheng Li | / | Suizhou, Hubei |
|
20 |
Fully automatic self-priming booster pump | Cheng Li | The water treatment capacity is 1000L/h | Suizhou, Hubei |
| 21 | air conditioner | Midea | / | Foshan, Guangdong |
|
22 |
Power frequency inverter charging
Electric all-in-one machine |
Cheng Li | / | Suizhou, Hubei |
Vi. Supply List of Essential spare parts and special Tools
| Serial Numbers |
姓名 |
Project Unit Requirements | Bidders Respond | ||||
| Specifications | “Unit | Quantity | Specifications | Single position | Quantity | ||
|
1 |
Spare tire | Standard equipment | article |
1 |
10.00 R20
18PR |
article |
1 |
| 2 | Vehicle-mounted tools | Standard equipment | Set of | 1 | Standard included | Set of | 1 |
| 3 | Vehicle-mounted fire extinguisher | Standard equipment | with | 1 | 2kg dry powder | with | 1 |
| 4 | Warning signs | Standard equipment | a | 1 | Standard configuration | a | 1 |
| 5 | Support pad wood | Standard equipment | a | 4 | Standard configuration | a | 4 |
| 6 | Awning | Standard configuration | a | 2 | Standard configuration | a | 2 |
