Dongfeng Tianlong 1000KW power supply vehicle


Power vehicle schedule:
| Serial Number | Project | 説明 | Reference Photo |
| 1 | Emergency power vehicle | Chengliwei brand engineering rescue vehicle. The vehicle is highly mobile. As an emergency power source, it has the advantages of a fixed generator set, as well as good driving performance, emergency response, strong mobility, and the ability to work in the open air. The vehicle has the Ministry of Industry and Information Technology’s “Announcement of Vehicle Manufacturers and Products”, the whole vehicle has obtained 3C certification, has obtained the purchase tax exemption announcement, and can be legally registered in the place of purchase.
Vehicle model: CLW5310XDYD6 power supply vehicle |
![]() |
| 2 | Vehicle chassis | With Dongfeng Tianlong chassis, half-cab reversible, Dongfeng Cummins engine wheelbase :1995+4600+1350mm
Rated power: 257KW(350 horsepower) Euro VI emission standard, original factory air conditioning, original factory hydraulic power steering, original factory ABS, original factory on-board tools. Maximum wading depth of 600mm. |
![]() |
| 3 | Vehicle box | The exterior of the body is made of high-quality cold-rolled steel plates, lined with high-quality cold-rolled steel plate bent frames, advanced technology, firm strength. The body is fully sealed and meets the requirements of transportation, rain protection, anti-corrosion, fire protection and rust prevention. The rear of the carriage has double doors. The intake and exhaust air of the generator set is silenced, and the muffler is silenced. | ![]() |
| 4 |
Material of the filling inside the box |
The filling material of the box body is flame-retardant sound-absorbing cotton and mesh plate. Features of flame-retardant sound-absorbing cotton: Good sound insulation effect, sound is blocked through the surface layer, sound enters the foaming holes and is absorbed by the friction and vibration of the air inside the holes, effectively blocking sound transmission, heat insulation and heat preservation, low thermal conductivity, very good heat insulation, cold insulation and heat preservation effect moisture-proof, this material belongs to closed-cell foaming, can prevent water vapor penetration, very good moisture-proof effect, good flame retardancy, the material contains flame retardancy, Smoke reduction material, extinguishes when removed from the fire. The box has a combination of functions such as soundproofing, heat insulation, dust-proofing, rain-proofing and shock-proofing. Professional sound insulation treatment, good sound absorption effect, effective noise reduction, overall aesthetic. When fully loaded, the average noise level is around 80 dB(A) at a distance of 1 m from the carriage | ![]() |
|
5 |
Step ladder |
The aluminium alloy treads are beautiful and convenient, and can carry about 150KG |
![]() |
|
6 |
View window |
Generator set inspection window, standing on the ground for operation, facilitates timely inspection of the working condition of the generator set |
![]() |
|
7 |
Blinds |
Blinds are for the intake and exhaust treatment of the generator set, have strong heat dissipation capacity and are easy to operate |
![]() |
| 8 | Generator set | It is equipped with a brushless generator set with a power of 1000KW, capable of full-load continuous safe operation for a long time, with a rated frequency of 50HZ and a rated voltage of 220/380V. Speed control methods: Electronic speed control, start battery, battery main switch. The fuel tank capacity of the generator set is sufficient for 8 hours of full-load operation of the generator set, and the installation position is reasonable and convenient for maintenance personnel to refuel daily. The control system can display water temperature, oil pressure, rotational speed, frequency, and all voltages, currents, powers, etc. can be intelligently achieved with one click. |
|
| 9 | Ground mounting | Grounding posts and grounding cables are connected to the dedicated grounding post head inside the vehicle box for convenient connection. When the unit is in operation, the grounding wire is connected to protect the safety of the operation. The electrical and mechanical equipment has strict leakage protection measures. During operation, the grounding wire of the entire vehicle is a low-voltage grounding wire equipped with a detachable grounding pin with a diameter of no less than 10mm. The grounding wire is 15 square millimeters and 10 meters in length | ![]() |
| 10 | Cable reel | Electric winch, located at the rear of the carriage, is very easy to operate and can be retracted and extended freely. The AC output cable is a flexible heavy-duty rubber-sheathed flexible cable, specifically designed for various mobile power equipment and can withstand greater mechanical force. For phases A, B and C, four 1×150mm ² single-core cables are used. For phase N, two 1×150mm ² cables are used. Each cable is 50 meters in length, and 14 cables make a total of 700 meters. | ![]() |
| 11 | Cable quick connectors
|
The connection between the output cable and the output end of the generator set can be made using a cable quick connector. Each cable has a copper nose at one end and a quick connector at the other end, with a total of 14 quick plugs. 14 quick sockets are installed at the power vehicle end in conjunction with the quick plugs at the cable end. It features quick plugging and unplugging, easy wiring, reliable electrical contact, good sealing and insulation, water and dust resistance, shock and vibration resistance, long service life, and the other end of the cable is connected with a copper nose. | ![]() |
| 11 | Internal lighting | LED lighting fixtures inside the carriage. When the generator set is started, it is powered by the generator set, and when it is shut down, it is powered by the vehicle’s DC battery, allowing for convenient switching. | ![]() |
| 12 | Hydraulic support and control | The vehicle is equipped with four hydraulic support legs to evenly distribute the vehicle’s static pressure in the stationary state, protecting the wheels and spring plates. The imported high-quality multi-way valve assembly is selected, the hydraulic support cylinder is equipped with imported seals, the static load of each leg is 10 tons, and a bidirectional hydraulic lock is added. | ![]() |
| 13 | Fire protection | Prepare two portable dry powder fire extinguishers and place them in easily accessible locations on the vehicle. | ![]() ![]() |
| 14 | Rearview camera | Install a visual reversing camera with a 7-inch display | ![]() |
| 15 | External lights
Optional
|
It is equipped with a lift light that can be controlled via both wireless and wired remote control, with a remote control operating distance of more than 25 meters; The height of the lift light is 1.8 meters, and it can rotate horizontally 365° and vertically 180° at a speed of 3r/min; The light source is adjustable and the power of the lamp is 2*150W | ![]() |




















